logologo

Curious. Creative. Living Boldly.
  • Home
  • Journal
  • Fibre Arts
  • Journeywoman
    • Bangkok to London
    • Northern Sea Route Russia 1
    • Northern Sea Route – Russia 2
    • Journey Bhutan – East to West 2016
    • Antarctica 2016
    • Peking to Paris in Penny 2016
    • India and Bhutan in Penny 2015
      • Kolkata
      • ON the Tram…. a bit fish-bowley but lots of waves and smiles…
      • Siliguri to Darjeeling
      • A mountain Drive….. Paro to Thimpu
      • Mongar to Trashingang
      • Trashingang to Sandrup Jongkhar
      • Kale to Monymar… then to so many temples at Bagan
      • Temples in Myanmar
      • Magical Ballooning over Temples in Bagan
      • Bagan to Inlay Lake
      • Inlay Lake
      • Inlay Lake to Taungoo
      • Taungoo to Kyaiktiyo
      • Last day in Myanmar and missing clouds in the sky
    • Greenland 2015
      • Iceberg Gallery
      • Magical Greenland….
      • Julie the landscape
      • Walking the tundra
      • Ymer Island…
      • Zodiacs and Icebergs!!!
      • Ittorqqortoormiit
    • Iceland 2015
    • Antarctica 2014
    • Chile 2014
    • Morocco in Penny 2013
    • Europe 2013
    • Bhutan 2016
    • Journal Categories
  • Photography
    • Biography
    • Arctic Silence
    • Svalbard Ice 2018
    • Svalbard Mountains
    • Antarctica 2016
    • The Shape of Cold
    • The Ice Breathes
    • Greenland 2015
    • Whales
    • Hindsight
    • Exhibitions
    • Books
  • Julie
    • About Julie Stephenson
    • Journeywoman
    • Photography
    • Shaman and Healer
    • Storyteller
    • Wisdom
      • Courage
    • What others have said….
  • Connect
Previous Post
Next Post
Feb 02
in Photography Teachings, Uncategorized 0 comments

Mentoring

Do you need that bit of feedback and extra guidance from a trusted person to help you take your images up to the next level?

I am able to do this by assisting you in your photographic practice to more clearly communicate your vision.

 

Is your photography or photo-media practice important enough to you to invest in professional expertise and guidance?

If so, I offer my professional mentoring consultancy, to support and develop the value you place in expressing yourself and your vision through your photography.

Have a read through my mentoring flyer

Investing in equipment is considered mandatory and not given a second thought, but investing in valuable and necessary expertise and guidance offered by trusted and respected teachers and mentors is equally as important.

I dedicate myself wholeheartedly as a mentor; to listen, observe, discern and to offer suggestions and guidance.

Through this programme I offer exclusive, personalised, confidential, one-on-one feedback, tuition, discussion and guidance in relation to your photo-media practice.

Whether your photo-media is of the environment you are in, is staged or directed, or heavily manipulated or transformed; I am able to mentor you to help you to create images which communicate more effectively.

Learning how to ‘listen’ to what your own images say is imperative if you want to be able to express your vision through them. All aspects of your photo-media practice will be considered in assisting you to create more powerful, expressive images.

Because I only mentor a small number of students, and application process is required.

Please refer to my brochure and contact me by email for application guidelines.

Share this:
3441
0
About the Author: Julie
I am a Journeywoman. I live my life as an explorer. An adventurer. An Observer. An Artist. There is no differentiation between how I live my life and the art that is an expression of it. It is through my experience adventuring the unknown, that I learn more about myself. My aim through this connection is to live where my expression is fully in alignment with the essence of who I am. “In the field of Fine-Art Photography, Julie stands apart from others with the way she sees the world and expresses her connection within it. Julie Stephenson’s photographs are sublime. Her work is an expression of her deep connection; and a gift to the world.”

  • Melt
    The Ice is melting. Sooner than we had imagined, the ice may just become a Read more
    in Arctic, Fine Art Photography 0 comments
    0
  • New perspectives….
    The start of a new adventure.... and new perspectives. I have smelled floods Read more
    in Europe 2013 0 comments
    0
  • Wabma kadarbu toward Arkaroola
    The flat landscape transforms as we pass through the North Flinders Ranges Read more
    in Around Australia 4WDing 0 comments
    0

Sorry, the comment form is closed at this time.

Journal Categories
  • Fine Art Journal Posts
  • Northern Sea Route
  • Peking to Paris Journal Posts
  • India and Bhutan
  • Antarctica Journal Posts
  • Greenland Journal Posts
  • Morocco Journal Posts
  • Tonga Journal Posts
  • Photography Teaching Journal Posts
  • Inspirations Journal Posts
  • Books
@skeinydipping

@skeinydipping

𝐌𝐮𝐥𝐭𝐢 𝐌𝐞𝐝𝐢𝐚 𝐀𝐫𝐭𝐢𝐬𝐭 | 𝐇𝐞𝐢𝐫𝐥𝐨𝐨𝐦 𝐓𝐞𝐱𝐭𝐢𝐥𝐞𝐬 Luxury Handwoven Blankets 🌏Stories from life & global adventures 🧩Woven into unique collector pieces Explore ⬇️
  • Options?? Hmmmmm Beating the weft on my rigid heddle loom - is an option! 

Your thoughts?? :) 

I’m a sassy older weaver who loves weaving. Have a look around my space here and come follow along. I may even make you laugh!
  • Yes.. slooooow! I’m weaving with my rigid heddle loom, where I stand and walk rather than sitting to weave. 

My blankets are based on my experiences, many of my series are based on travelling the world in our 100 year old vintage car. What do you base your weaving pieces on? 

Found my weaving interesting, let your weaving bestie know. I share tips and ideas which may help your weaving, so come follow along.
  • Do you skip this step? Some new weavers don’t realise until after they’ve cut their weaving off their loom that the ends start to come adrift! 

I see it sooo often. 

Here I’m making sure I don’t catch the woven header, but making sure I secure the warp threads into small clumps, by Hemstitching. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Your weaving bestie may also be grateful for this reminder. For more tips and ideas, come follow along.
  • Wish more new weavers would try this. Just two is all that’s needed! 

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use as many cardboard strips as sticks of spaghetti in a packet (yes, that may be an exaggeration lol) , but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour. 

Follow along to see the next step where I show the most important Hemstitching!
  • Hemstitching is important. Some new weavers skip this step and don’t realise until after they’ve cut their weaving off the loom that the ends start to come adrift!

Here I’m making sure I don’t catch the woven header, but securing the warp threads into small clumps. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Save this to remember.. and come follow along.
  • Woohoo! You’ve found my space here where you can see some of my experience and grab some tips and ideas and use for your next projects. 

I use a very simple rigid heddle loom, and combine that with a lifetime of experience as an artist, creative and weaver.

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use heaps more, but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour than my woven piece. You’ll see why, in a later reel. 

Follow along to see the next step where I show the most important Hemstitching!
  • You bit ‘meh’ about starting your next weaving project? I’m an artist and weaver and I share tips and ideas in my space here which may help you to ignite your weaving mojo again! Follow along and see. I may even make you laugh.
  • A not very technical solution to a very important task. The warp thread clumps need to be separated evenly. A simple solution. 

I’ve found that only two cardboard strips are necessary. I then weave about 1.5cm or an inch of header, using a yarn colour that I won’t be using in my weaving; so when I hemstitch I don’t catch the header yarn. 

So.. the 2 cardboard strips and a small section of woven header gets the warp perfectly evenly spread ready to weave the weft. 

I’ll show the header and hemstitch in an upcoming reel. Follow if you want to see some tips for those steps.
  • “What’s your studio dress code? Or are we all just pretending we’re going to get dressed and then… not?”
View on Instagram
Options?? Hmmmmm Beating the weft on my rigid heddle loom - is an option! 

Your thoughts?? :) 

I’m a sassy older weaver who loves weaving. Have a look around my space here and come follow along. I may even make you laugh!
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Options?? Hmmmmm Beating the weft on my rigid heddle loom - is an option! Your thoughts?? 🙂 I’m a sassy older weaver who loves weaving. Have a look around my space here and come follow along. I may even make you laugh!
18 hours ago
View on Instagram |
1/9
Yes.. slooooow! I’m weaving with my rigid heddle loom, where I stand and walk rather than sitting to weave. 

My blankets are based on my experiences, many of my series are based on travelling the world in our 100 year old vintage car. What do you base your weaving pieces on? 

Found my weaving interesting, let your weaving bestie know. I share tips and ideas which may help your weaving, so come follow along.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Yes.. slooooow! I’m weaving with my rigid heddle loom, where I stand and walk rather than sitting to weave. My blankets are based on my experiences, many of my series are based on travelling the world in our 100 year old vintage car. What do you base your weaving pieces on? Found my weaving interesting, let your weaving bestie know. I share tips and ideas which may help your weaving, so come follow along.
19 hours ago
View on Instagram |
2/9
Do you skip this step? Some new weavers don’t realise until after they’ve cut their weaving off their loom that the ends start to come adrift! 

I see it sooo often. 

Here I’m making sure I don’t catch the woven header, but making sure I secure the warp threads into small clumps, by Hemstitching. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Your weaving bestie may also be grateful for this reminder. For more tips and ideas, come follow along.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Do you skip this step? Some new weavers don’t realise until after they’ve cut their weaving off their loom that the ends start to come adrift! I see it sooo often. Here I’m making sure I don’t catch the woven header, but making sure I secure the warp threads into small clumps, by Hemstitching. I’m doing a tutorial which I’m aiming to post in the near future. Your weaving bestie may also be grateful for this reminder. For more tips and ideas, come follow along.
2 days ago
View on Instagram |
3/9
Wish more new weavers would try this. Just two is all that’s needed! 

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use as many cardboard strips as sticks of spaghetti in a packet (yes, that may be an exaggeration lol) , but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour. 

Follow along to see the next step where I show the most important Hemstitching!
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Wish more new weavers would try this. Just two is all that’s needed! This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use as many cardboard strips as sticks of spaghetti in a packet (yes, that may be an exaggeration lol) , but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour. Follow along to see the next step where I show the most important Hemstitching!
2 days ago
View on Instagram |
4/9
Hemstitching is important. Some new weavers skip this step and don’t realise until after they’ve cut their weaving off the loom that the ends start to come adrift!

Here I’m making sure I don’t catch the woven header, but securing the warp threads into small clumps. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Save this to remember.. and come follow along.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Hemstitching is important. Some new weavers skip this step and don’t realise until after they’ve cut their weaving off the loom that the ends start to come adrift! Here I’m making sure I don’t catch the woven header, but securing the warp threads into small clumps. I’m doing a tutorial which I’m aiming to post in the near future. Save this to remember.. and come follow along.
2 days ago
View on Instagram |
5/9
Woohoo! You’ve found my space here where you can see some of my experience and grab some tips and ideas and use for your next projects. 

I use a very simple rigid heddle loom, and combine that with a lifetime of experience as an artist, creative and weaver.

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use heaps more, but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour than my woven piece. You’ll see why, in a later reel. 

Follow along to see the next step where I show the most important Hemstitching!
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Woohoo! You’ve found my space here where you can see some of my experience and grab some tips and ideas and use for your next projects. I use a very simple rigid heddle loom, and combine that with a lifetime of experience as an artist, creative and weaver. This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use heaps more, but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour than my woven piece. You’ll see why, in a later reel. Follow along to see the next step where I show the most important Hemstitching!
3 days ago
View on Instagram |
6/9
You bit ‘meh’ about starting your next weaving project? I’m an artist and weaver and I share tips and ideas in my space here which may help you to ignite your weaving mojo again! Follow along and see. I may even make you laugh.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
You bit ‘meh’ about starting your next weaving project? I’m an artist and weaver and I share tips and ideas in my space here which may help you to ignite your weaving mojo again! Follow along and see. I may even make you laugh.
4 days ago
View on Instagram |
7/9
A not very technical solution to a very important task. The warp thread clumps need to be separated evenly. A simple solution. 

I’ve found that only two cardboard strips are necessary. I then weave about 1.5cm or an inch of header, using a yarn colour that I won’t be using in my weaving; so when I hemstitch I don’t catch the header yarn. 

So.. the 2 cardboard strips and a small section of woven header gets the warp perfectly evenly spread ready to weave the weft. 

I’ll show the header and hemstitch in an upcoming reel. Follow if you want to see some tips for those steps.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
A not very technical solution to a very important task. The warp thread clumps need to be separated evenly. A simple solution.  I’ve found that only two cardboard strips are necessary. I then weave about 1.5cm or an inch of header, using a yarn colour that I won’t be using in my weaving; so when I hemstitch I don’t catch the header yarn.  So.. the 2 cardboard strips and a small section of woven header gets the warp perfectly evenly spread ready to weave the weft.  I’ll show the header and hemstitch in an upcoming reel. Follow if you want to see some tips for those steps.
4 days ago
View on Instagram |
8/9
“What’s your studio dress code? Or are we all just pretending we’re going to get dressed and then… not?”
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
“What’s your studio dress code? Or are we all just pretending we’re going to get dressed and then… not?”
4 days ago
View on Instagram |
9/9

 

 

 

@skeinydipping

@skeinydipping

𝐌𝐮𝐥𝐭𝐢 𝐌𝐞𝐝𝐢𝐚 𝐀𝐫𝐭𝐢𝐬𝐭 | 𝐇𝐞𝐢𝐫𝐥𝐨𝐨𝐦 𝐓𝐞𝐱𝐭𝐢𝐥𝐞𝐬 Luxury Handwoven Blankets 🌏Stories from life & global adventures 🧩Woven into unique collector pieces Explore ⬇️
  • Options?? Hmmmmm Beating the weft on my rigid heddle loom - is an option! 

Your thoughts?? :) 

I’m a sassy older weaver who loves weaving. Have a look around my space here and come follow along. I may even make you laugh!
  • Yes.. slooooow! I’m weaving with my rigid heddle loom, where I stand and walk rather than sitting to weave. 

My blankets are based on my experiences, many of my series are based on travelling the world in our 100 year old vintage car. What do you base your weaving pieces on? 

Found my weaving interesting, let your weaving bestie know. I share tips and ideas which may help your weaving, so come follow along.
  • Do you skip this step? Some new weavers don’t realise until after they’ve cut their weaving off their loom that the ends start to come adrift! 

I see it sooo often. 

Here I’m making sure I don’t catch the woven header, but making sure I secure the warp threads into small clumps, by Hemstitching. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Your weaving bestie may also be grateful for this reminder. For more tips and ideas, come follow along.
  • Wish more new weavers would try this. Just two is all that’s needed! 

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use as many cardboard strips as sticks of spaghetti in a packet (yes, that may be an exaggeration lol) , but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour. 

Follow along to see the next step where I show the most important Hemstitching!
  • Hemstitching is important. Some new weavers skip this step and don’t realise until after they’ve cut their weaving off the loom that the ends start to come adrift!

Here I’m making sure I don’t catch the woven header, but securing the warp threads into small clumps. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Save this to remember.. and come follow along.
  • Woohoo! You’ve found my space here where you can see some of my experience and grab some tips and ideas and use for your next projects. 

I use a very simple rigid heddle loom, and combine that with a lifetime of experience as an artist, creative and weaver.

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use heaps more, but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour than my woven piece. You’ll see why, in a later reel. 

Follow along to see the next step where I show the most important Hemstitching!
  • You bit ‘meh’ about starting your next weaving project? I’m an artist and weaver and I share tips and ideas in my space here which may help you to ignite your weaving mojo again! Follow along and see. I may even make you laugh.
  • A not very technical solution to a very important task. The warp thread clumps need to be separated evenly. A simple solution. 

I’ve found that only two cardboard strips are necessary. I then weave about 1.5cm or an inch of header, using a yarn colour that I won’t be using in my weaving; so when I hemstitch I don’t catch the header yarn. 

So.. the 2 cardboard strips and a small section of woven header gets the warp perfectly evenly spread ready to weave the weft. 

I’ll show the header and hemstitch in an upcoming reel. Follow if you want to see some tips for those steps.
  • “What’s your studio dress code? Or are we all just pretending we’re going to get dressed and then… not?”
View on Instagram
Options?? Hmmmmm Beating the weft on my rigid heddle loom - is an option! 

Your thoughts?? :) 

I’m a sassy older weaver who loves weaving. Have a look around my space here and come follow along. I may even make you laugh!
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Options?? Hmmmmm Beating the weft on my rigid heddle loom - is an option! Your thoughts?? 🙂 I’m a sassy older weaver who loves weaving. Have a look around my space here and come follow along. I may even make you laugh!
18 hours ago
View on Instagram |
1/9
Yes.. slooooow! I’m weaving with my rigid heddle loom, where I stand and walk rather than sitting to weave. 

My blankets are based on my experiences, many of my series are based on travelling the world in our 100 year old vintage car. What do you base your weaving pieces on? 

Found my weaving interesting, let your weaving bestie know. I share tips and ideas which may help your weaving, so come follow along.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Yes.. slooooow! I’m weaving with my rigid heddle loom, where I stand and walk rather than sitting to weave. My blankets are based on my experiences, many of my series are based on travelling the world in our 100 year old vintage car. What do you base your weaving pieces on? Found my weaving interesting, let your weaving bestie know. I share tips and ideas which may help your weaving, so come follow along.
19 hours ago
View on Instagram |
2/9
Do you skip this step? Some new weavers don’t realise until after they’ve cut their weaving off their loom that the ends start to come adrift! 

I see it sooo often. 

Here I’m making sure I don’t catch the woven header, but making sure I secure the warp threads into small clumps, by Hemstitching. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Your weaving bestie may also be grateful for this reminder. For more tips and ideas, come follow along.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Do you skip this step? Some new weavers don’t realise until after they’ve cut their weaving off their loom that the ends start to come adrift! I see it sooo often. Here I’m making sure I don’t catch the woven header, but making sure I secure the warp threads into small clumps, by Hemstitching. I’m doing a tutorial which I’m aiming to post in the near future. Your weaving bestie may also be grateful for this reminder. For more tips and ideas, come follow along.
2 days ago
View on Instagram |
3/9
Wish more new weavers would try this. Just two is all that’s needed! 

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use as many cardboard strips as sticks of spaghetti in a packet (yes, that may be an exaggeration lol) , but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour. 

Follow along to see the next step where I show the most important Hemstitching!
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Wish more new weavers would try this. Just two is all that’s needed! This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use as many cardboard strips as sticks of spaghetti in a packet (yes, that may be an exaggeration lol) , but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour. Follow along to see the next step where I show the most important Hemstitching!
2 days ago
View on Instagram |
4/9
Hemstitching is important. Some new weavers skip this step and don’t realise until after they’ve cut their weaving off the loom that the ends start to come adrift!

Here I’m making sure I don’t catch the woven header, but securing the warp threads into small clumps. 

I’m doing a tutorial which I’m aiming to post in the near future. 

Save this to remember.. and come follow along.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Hemstitching is important. Some new weavers skip this step and don’t realise until after they’ve cut their weaving off the loom that the ends start to come adrift! Here I’m making sure I don’t catch the woven header, but securing the warp threads into small clumps. I’m doing a tutorial which I’m aiming to post in the near future. Save this to remember.. and come follow along.
2 days ago
View on Instagram |
5/9
Woohoo! You’ve found my space here where you can see some of my experience and grab some tips and ideas and use for your next projects. 

I use a very simple rigid heddle loom, and combine that with a lifetime of experience as an artist, creative and weaver.

This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use heaps more, but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour than my woven piece. You’ll see why, in a later reel. 

Follow along to see the next step where I show the most important Hemstitching!
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
Woohoo! You’ve found my space here where you can see some of my experience and grab some tips and ideas and use for your next projects. I use a very simple rigid heddle loom, and combine that with a lifetime of experience as an artist, creative and weaver. This is a very simple tip to use just 2 cardboard strips as a header. I see some weavers use heaps more, but as you can see, two is perfectly adequate; followed by a small section of woven header in a contrasting colour than my woven piece. You’ll see why, in a later reel. Follow along to see the next step where I show the most important Hemstitching!
3 days ago
View on Instagram |
6/9
You bit ‘meh’ about starting your next weaving project? I’m an artist and weaver and I share tips and ideas in my space here which may help you to ignite your weaving mojo again! Follow along and see. I may even make you laugh.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
You bit ‘meh’ about starting your next weaving project? I’m an artist and weaver and I share tips and ideas in my space here which may help you to ignite your weaving mojo again! Follow along and see. I may even make you laugh.
4 days ago
View on Instagram |
7/9
A not very technical solution to a very important task. The warp thread clumps need to be separated evenly. A simple solution. 

I’ve found that only two cardboard strips are necessary. I then weave about 1.5cm or an inch of header, using a yarn colour that I won’t be using in my weaving; so when I hemstitch I don’t catch the header yarn. 

So.. the 2 cardboard strips and a small section of woven header gets the warp perfectly evenly spread ready to weave the weft. 

I’ll show the header and hemstitch in an upcoming reel. Follow if you want to see some tips for those steps.
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
A not very technical solution to a very important task. The warp thread clumps need to be separated evenly. A simple solution.  I’ve found that only two cardboard strips are necessary. I then weave about 1.5cm or an inch of header, using a yarn colour that I won’t be using in my weaving; so when I hemstitch I don’t catch the header yarn.  So.. the 2 cardboard strips and a small section of woven header gets the warp perfectly evenly spread ready to weave the weft.  I’ll show the header and hemstitch in an upcoming reel. Follow if you want to see some tips for those steps.
4 days ago
View on Instagram |
8/9
“What’s your studio dress code? Or are we all just pretending we’re going to get dressed and then… not?”
View Reel on Instagram
@skeinydipping
@skeinydipping
•
Follow
“What’s your studio dress code? Or are we all just pretending we’re going to get dressed and then… not?”
4 days ago
View on Instagram |
9/9
2025 All photographs created by and property of Julie Stephenson.